Num'axes PIE1051 Manual De Instrucciones página 23

The OFF mode is the "safe mode" for actions such as: replacing the memory card, replacing the SIM card,
replacing the batteries or transporting the camera.
7.3. How to connect the camera to the network?
When you slide the switch to the SETUP position, if a SIM card is inserted, the camera automatically enters a
signal search process.
If a signal bar pops up on the screen, it means the camera has automatically connected to the network.
By then, you only need to fill in the information in the "Recipients" setting of the configuration menu to
receive photos.
If the message "SIM Auto setup failed, enter setups manually" pops up on the screen, please switch the "SIM
setup" from "Auto setup" to "Manual setup" mode, then enter the MMS and 4G setups in "Manual Setup".
7.4. Photo/video replay on the LCD screen
− Slide the switch to the SETUP position.
− Press  to enter the replay function, then press  and  for selection.
− Press OK to play photo/video.
− Press  again to exit.
7.5. Delete files
− Slide the switch to the SETUP position.
− Press  to enter the replay function, then press  and  for selection.
− Press the MENU button then select "Delete" and press OK.
− Select "One" (delete the selected photo/video) or "All" (delete all photos/videos) then press OK.
− If your selected "One", "Delete This File?" will appear on the screen, select "Yes" or "No" then press
OK.
− If you selected "All", "Delete all files?" will appear on the screen, select "Yes" or "No" then press OK.
− Press MENU to exit.
7.6. Format memory card
− Slide the switch to the SETUP position.
− Press  to enter the replay function.
− Press the MENU button then select "Format" and press OK.
− Select "Yes" or "No". If you selected "Yes", "Are you really sure?" will appear on the screen, select "Yes"
or "No" then press OK.
− Press MENU to exit.
7.7. Webcam Mode
When the camera is connected via USB cable; the LCD screen displays "MSDC". Press the MENU button once,
"MSDC" turns to "PC Cam", the camera now can be used as a PC camera (webcam). Press the MENU button
again, the camera exits the PC camera mode.
7.8. Auto power off
In SETUP mode, the camera will automatically power off if you don't press the keypad for more than
3 minutes.
Slide the switch to OFF then back to SETUP if you want to do some further configuration.
PIE1051 - Indice D – Mars 2022 23/104