Create CREPE MAKER Manual De Usuario página 9

• Set machine temperature based on amount, size, thickness of food, recipe or personal
preference.
• It is suggested to preheat the product 3 minutes before baking.
• Clean the machine as soon as possible after it has cooled down to avoid sticking to the
platen or machine body.
• Unplug the machine from the electrical outlet and wait until the product has completely
cooled down before cleaning.
• The outer surface of the product and the baking tray can be cleaned with a damp soft cot-
ton cloth or sponge.
• Do not brush the product with brushes or hard items to avoid damaging the surface of the
product and the protective layer of the baking tray.
• Do not clean the product with toxic or corrosive detergents such as thinner, polishing
agent, etc.
• Dry the spare parts after cleaning them before turning on the product.
NOTE: Never immerse the motor unit in water.
ISSUE
The power supply indicator is
not on.
The food is not fully cooked or
is burned.
The machine emits a particu-
lar odor.
Automatic temperature con-
trol fails.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
SUGGESTIONS
CARE AND MAINTENANCE
COMMON PROBLEMS
REASON
Power failure.
The outlet is not turned on or
has poor contact.
The supply voltage does not
meet the rated voltage
The selected bake time and
temperature are incorrect.
There may be residue on the
baking tray.
The temperature controller
is broken
SOLUTION
Inspect and repair the power supply.
Adjust the baking temperature based
on the combination of the recipe and
personal experience.
Clean the tray and remove any residue
that may be there.
Contact customer service so that the
machine can be repaired.
E NGLI SH
9