Descargar Imprimir esta página

EPTA COSTAN GRANSESIA Instrucciones De Uso Para El Usuario página 57

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 82
Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
IT
L
The door has been designed to remain
open WITHOUT ANY MECHANICAL
BLOCKING SYSTEM, simply opening it
FR
90°. Furthermore, the "soft-closing"
system ensures a slow and gentle
EN
EN
automatic closure in the final part
without the need to force its closure.
DE
For this reason, it is NOT NECESSARY
TO OPEN the door more than 90° and
ES
block it with weights or KEEP IT in
position if it is already open 90° ("Fig.
19, "Fig. 21").
PT
F
During the loading phase, if there are
sliding baskets (optional), they must
not all be removed at the same time
("Fig. 22").
9.8
Use of cabinet
Lighting
The cabinet lighting is controlled by a switch on
the top right of the cabinet.
Thermostat/thermometer
A
remote
positioned on the bottom right of the cabinet to
control the temperature.
N°DOC. UM000223 REV. "C" - 28/03/22
thermostat/thermometer
GRANSESIA
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
9.9
Cleaning and ordinary
maintenance
Good visibility in the intervention area is
recommended, possibly using an additional
light source.
L
Anti-fogging coating of the doors LOW
CONSUMPTION. The doors of the
cabinet have an anti-fogging coating
which prevents the formation of fog in
any
humidity,
immersions
cleaning. Extremely hydrophilic, the
coating produces drops of water which
propagate and do not, therefore, turn
into
humidity, the coating does not melt in
water and, consequently, is not stained
if wet. The film is not damaged by
commercial detergents for glass, stain
removers, ammonia, alcohol and petrol
and does not discolour when exposed to
sun or heat.
The doors are provided with laminated anti-
fogging coating on the inner glass and protected
is
by a layer.
The protective layer is partially raised on the
sides to facilitate its removal during use. The
protective layer must be removed after the
doors have been installed on the cabinet once
the
cabinet
temperature. This is to allow immediate
operation of the anti-fogging film.
To recall this passage, the following label is
attached to the protective film: " DO NOT
REMOVE THE PROTECTIVE FILM UNTIL THE
CABINET HAS REACHED THE OPERATING
TEMPERATURE".
temperature
condition
even
after
in
water
or
fog.
Though
absorbing
has
reached
the
16/20
and
prolonged
frequent
the
operating

Publicidad

loading