EN
DIRECTIONS FOR USE
•
For stability and to avoid cross-threading screws, assemble all parts manually and start by tightening
all screws by hand. Once all parts have been assembled, you can tighten the screws more securely.
•
Your product is made from epoxy-painted steel which delays rusting. However, as soon as signs of
corrosion appear, we recommend immediately treating the affected areas using a suitable anti-rust
product which you can find at large DIY stores.
•
We recommend taking winter precautions with your product by storing it away in a dry place. The same
applies for extended periods of non-use.
•
The packaging is to be disposed of correctly. Keep packing away from of children.
IMPORTANTE
•
This product has been exclusively designed for outdoor use, well away from all flammable products.
•
This appliance must be kept away from flammable materials during use.
•
This device must be installed on a flat surface, protected from the rain or covered to avoid direct
contact with water.
•
The parts protected by the manufacturer must not be handled by the user.
•
The installation must be carried out exactly according to these instructions. There is a safety risk in
case of incorrect installation.
The elements that have been assembled by the manufacturer or the seller must not be changed.
You cannot change the components that make up this apparatus. Any repairs must be carried
out after authorisation by the After Sales Department of Alice's Garden, the exclusive supplier of
10
certified replacement pieces.
09/11/2022