Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS MANUAL
Operating and control elements
6. CONTROL PANEL
On/Off button (switching the appliance on and off)
Reading the temperature progression
Selection buttons
SuperFrost button
Audible alarm Off button
Defrost button (for manually activating the defrost function)
Enter button
Symbols in the display
Compressor is running
LED flashing - refrigeration unit switches on after a delay.
The compressor will start automatically after the pressure
in the refrigerant circuit has equalised.
Fan is running
Appliance is defrosting
The
display means that the power supply and interior
temperature of the appliance are recorded.
If
flashes in the display, there has either been a power
failure or the temperature in the appliance exceeded the
permissible range.
SuperFrost is activated
Alarm function
The appliance has suffered a fault. Contact the customer
service department.
Switching the appliance on and off
7. SWITCHING ON/OFF
Connect the appliance to the mains. Display = OFF
Switching the appliance on
Press
for approx. 3 seconds. Display = ON
Switching the appliance off
Press
for approx. 3 seconds. Display = OFF
16
J
.P. SELECTA s.a.u.
CODE 80170
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - http://www.jpselecta.es
REV D
Setting the temperature
8. TEMPERATURE SETTINGS
Press
for 1 second. The temperature display flashes.
To increase the temperature (warmer): press button
To reduce the temperature (colder): press button
Press
again. The desired temperature setting is saved.
Note
The temperature in the warmest area of the interior may be higher
than the temperature setting.
If the door is left open for a lengthy period, the temperature in the
appliance's compartments may rise dramatically.
Temperatur display mode
The temperature display can be switched between degrees Cel-
sius and degrees Fahrenheit. Factory setting is degrees Celsius.
Press
for 5 seconds. Display =
Press
. Display =
Use button
or
to select the desired setting.
0 = °C
1 = °F
Press
. Display =
Press
for 5 seconds. The electronic control system will switch
back to normal operating mode.
SuperFrost
Use SuperFrost, to rapidly cool large amounts of food. When
SuperFrost is activated, the appliance operates with maximum
cooling performance.
Activating SuperFrost
Press
for approx. 3 seconds. Display =
Place the fresh food in the appliance.
The electronic control system will automatically switch back to
normal operating mode.
Prematurely deactivating SuperFrost
Press
for approx. 3 seconds. Display =
9. ALARMS
Door open alarm
When the door is opened, the LED
display begins to flash.
When the door has been left open for more than 240 seconds, the
LED
begins to flash, and
flash alternately in the display.
The audible warning signal sounds (unless the audible warning
signal function has been deactivated).
If the door has to stay open for longer in order to insert items to be
cooled, cancel the audible warning signal by pressing button
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
07/2020
Pag. 16
.
.
lights up and the temperature
and the temperature indication
.
Publicidad
Tabla de contenido
