Eschenbach economy visionLED Manual De Instrucciones página 6

English
Safety instructions
 Risk of dazzling and injury! Do not look at the light source for long periods!
 Protect your desk lamp from impact or shock, moisture and excessive heat!
Never place your desk lamp near a heat source or in direct sunlight.
 Do not use the desk lamp near containers fi lled with water!
 Risk of tripping! Make sure that the power cord is not posing a danger!
Do not wrap the power cord around the table lamp!
 Only use the desk lamp with the supplied power supply unit.
 If the housing, power supply unit or cable are damaged, the desk lamp must no longer be used.
 Ensure that other people, particularly children, are aware of these risks!
Intended use
The desk lamp is intended for illuminating the reading and working area. It is only suitable for indoor use in dry
rooms. Only use the desk lamp as described in this user manual. Any other use is considered improper and can
lead to property damage or personal injury. Do not make any changes to the construction of the desk lamp. No
liability is assumed for damage caused by improper or incorrect use.
Operating elements
 Stand
w Lamp head
e Arm for adjusting the lamp head
 Support arm for the lamp head
 Joint to adjust the support arm for the lamp head
 Socket for the power cord plug
u Color temperature toggle switch M
button: switching on and off

button: increase brightness
o
button: decrease brightness
a
Starting up
1. Set the desk lamp on a fl at and stable surface.
2. Plug the connector of the supplied power cord into the socket  at the rear of the lamp base.
3. Insert the mains plug of the cable into a properly wired electrical outlet.
4. Gently tap the touch button
5. Use the touch buttons
the brightness in 5 steps. Repeatedly tap briefl y
6. Tap on the toggle switch M u repeatedly to switch through the 3 available color temperatures:
3000 K, provides a yellowish warm-white light.
4000 K, provides a yellowish-white light.
5000 K, provides a slightly blue-white light.
 to turn the lamp on or off . A slight warming in the area of lit LEDs is normal.
o and a to adjust the brightness. Repeatedly tap briefl y
a to decrease the brightness in 5 steps.
- 6 -
o to increase