Publicidad
Idiomas disponibles
Idiomas disponibles
ISOFIX+3-point retractor safety belts+top tether
This semi universal child restraint can be installed in below position of the
vehicle.
FRONT
/
NOT ALLOWED
This child car seat is only fit for vehicles which are approved to regulation
GB14166 or ECE R16 with 3 point retractor safety-belts:
•
The lap and diagonal seat-belt must be used at all times when your child is
in the child car seat.
•
Ensure that the child car seat is as close as possible to the backrest of the
vehicle seat.
•
Remove the head rest of the passenger seat being used if it obstructs the
proper installation of the child car seat. Remember to refit the headrest
when the child car seat has been removed.
•
Place the car seat on the vehicle seat. Rotate the adjuster button in an
anti-clock wise direction, and pull the ISOFIX anchors outwards as far as it
goes, make sure it cannot be pushed back (F11)
•
Push the car seat towards the back of vehicles seat, Match the ISOFIX
anchors to the vehicles anchoring point until you hear a "click"(F12).
REAR
SIDE PARTS
ALLOWED
MIDDLE PARTS
NOT ALLOWED
EN
31
Publicidad
