Xiaomi Smart Tower Heater Lite Manual De Usuario página 8

Troubleshooting
Issue
The heater is not
connecting to
power.
The heater does
not work.
The heater cannot
be found in the
app.
The heater makes
unusual sounds
when it is moved
or shaken.
Specifications
Name: Fan Heater
Model: LSNFJ02LX
Rated Voltage: 220–240 V~
Rated Frequency: 50–60 Hz
Rated Power: 2000 W
Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the
antenna and the body of the user.
Possible Cause
The power cord is not plugged in
properly.
The heater is not turned on.
The heater is not placed steadily.
The heater is not started.
The temperature is too high, and
the heater automatically turns off to
ensure safety.
The child lock function is enabled.
The network connection fails.
The Wi-Fi signal is weak.
The power cord is not plugged in
properly.
The steel ball in the anti-tilt switch
rattles.
Check whether the plug and the power cord are
Press the power button to turn the heater on.
Place the heater steadily on a level surface.
Press the on/standby button on the control
panel to start the heater.
Keep the air inlet and the air outlet clear and
unobstructed, and restart the heater after it
Disable the child lock.
Keep the phone and the heater close to the
Plug the heater in properly and turn it on again.
Place the heater on a level surface steadily and
avoid shaking it violently.
Natural Mode Power: 12 W
Item Dimensions: 184 × 184 × 500 mm
Net Weight: Approx. 2.2 kg
Operation Frequency: 2400–2483.5 MHz
Maximum Output Power: < 20 dBm
7
Solution
plugged in properly.
cools down.
Reset the Wi-Fi.
Wi-Fi signal source.