Pull out the three-point belt, fasten theseat belt, pass it under the armrest
on the opposite side and close it.
Make sure that the three-point belt and the seat belt buckle on the side of
the armrest are down. The seat belt should be guided downwards to ensure
that the pelvis is firmly strapped onto the child seat and that the seat belt is
not twisted. The seat belt buckle is engaged when you hear a "click".
Pass the three-point belt through the side of the belt facing the headrest.
Make sure that the belt is not twisted. Tighten the vehicle seat belt so
that the three-point belt is as low as possible and it is aligned as intended
without using the child seat.
Note: The illustration shows the most favourable position of the child
seat on the car seat. If you have any questions, contact the manufacturer
or customer service.
3
4
EN
29