Black and Decker home 900142 Manual Del Usuario página 7

Setting Clock
1. Press and hold in MODE button until clock
digits flash.
2. Press ▲ or ▼ button to select desired hour
including AM or PM. Press SET to save.
3. The minutes will now flash.
4. Press ▲ or ▼ button to select desired minutes.
Press SET to save.
Setting Hot Water Temperature
1. Press and hold in MODE button until clock
digits flash.
2. Press Set repeatedly until both hot icon "
and number above are flashing.
3. Use ▲ or ▼ button to select desired hot water
temperature between 149° - 199°F. Press SET
to save.
4. After 20 seconds readout will return home.
Setting Cold Water Temperature
1. Press and hold in MODE button until clock
digits flash.
2. Press Set repeatedly until both cold icon "
" and number above are flashing.
3. Use ▲ or ▼ button to select desired hot water
temperature between 39° - 59°F. Press SET to
save.
4. After 20 seconds readout will return home.
Note: If power goes out, your clock will blink until it is reset. Your water
temperatures are stored in memory and will remain as they were last set.
All manuals and user guides at all-guides.com
Model # 900142: Page 7
"