Muvit N2W Manual Del Propietário página 5

Charging: Orange LED indicator for charging status. LED indicator
turns white upon charging finished.
Turning off: Orange LED lights up for a while.
Enter the Wireless:
Long press power switch to turn it on, white LED indicator lights
up for a while then off for 5 seconds, it ,automatically enter the
pairing with the orange and white LED indicator flash alternately.
Or long press the power switch to enter the pairing status of
the Wireless mode till the orange and white LED indicator flash
alternately.
Wireless connection :
1, Press the power switch to turn on the headphone, and then
enter the pairing status of the Bluetooth mode.
2, When the orange and white LED indicator flash alternately, turn
on the Wireless function of the Wireless devices (mobile phones,
computers, etc.), search for Wireless devices, "Muvit N2W".
3, Click manually then device automatically connect. When the
Wireless connected successfully, the LED indicator will be off with
a voice prompt. (The password is "0000". Generally, the password
is not needed).
Charging method:
Connect the provided micro USB charging cable to a computer
or USB charger. Orange LED indication for charging status. LED
indicator turn white upon charging finished.
Low battery :
If the power is low, the speaker will automatically turn off. Please
charge in time; If you haven't used it for long time, Please charge
at least once a month, which can protect the battery .
Warm tips: In order to extend the speaker service life, it is not
recommended to adjust the speakers to the maximum level for
a long time.
Wired mode: Dual 3.5mm Audio Cable Connecting To Audio Jack
5