ANSMANN PS600AC Manual De Instrucciones página 9

TECHNICAL SPECIFICATIONS
Input:
Output:
Mode
USB-A1/-A2
USB-A QC
USB-A QC
USB-A QC
USB-C PD
USB-C PD
USB-C PD
USB-C PD
USB-C PD
DC1/DC2/DC3
AC
Jump start
Protective functions:
Display:
Nominal voltage:
Energy content:
Cell chemistry:
Operating temperature: -20° C ... 55° C
Storage temperature:
Size:
Weight:
Delivery includes:
Powerstation, AC charger, 12V DC connection cable, operating instructions, warranty
card
Before using the Powerstation for the first time, fully charge it once with the power
supply unit included.
Charging options:
• Connection of the mains power supply unit supplied to the DC input.
• Charging via solar panel
• Charging via 12V car adapter cable
First use:
1. Connect your end device to the appropriate output socket.
2. Switching on: Press one of the buttons AC, DC or USB.
3. Switching off: Press the corresponding switch button of the occupied output or dis-
connect the plug.
4. Automatic switch-off at low current draw (<200mA):
Without manual switch-off, the outputs remain activated for another 6 hours, even if
no more power consumption is measured. If the power being drawn does not increase
above the minimum value within 6.5 hours, automatic shutdown is initiated.
DC5521 12.0 V ... 30.0 V | 8.3 A | max. 100.0 W
Voltage Current
5,0 V 2,4 A
5,0 V 3 A
9,0 V 2 A
12,0 V 1,5 A
5,0 V 3 A
9,0 V 3 A
12,0 V 3 A
15,0 V 3 A
20,0 V 3 A
12,0 V 10 A
230,0 V
12,0 V 500 A
Short circuit protection Temperature control Overvoltage
protection Overcurrent protection
LED display with percentage value
3.7 V
640 Wh
Lithium iron phosphate
-20° C ... 55° C
263 × 221 × 216 mm
9 kg
Power
12,0 W
15,0 W
18,0 W
18,0 W
15,0 W
18,0 W
36,0 W
45,0 W
60,0 W
120,0 W
600,0 W
9