Publicidad
Enlaces rápidos
High performance-price ratio | Excellent customer support
Email:sale@soonfire.com
Website:http://www.soonfire.com
Activate your warranty:
http://www.soonfire.com/warranty
User Manual for the Flashlight
A. Press the switch for 0.5 seconds to turn on - Set
the switch on "low-middle-ultra-bright mode"
brightness - Press the switch for 0.5 seconds to
turn off and memorize last mode.
B. Quickly double-click the switch to choose
"ultra-bright mode" - Quickly double-click the
switch again to set "Strobe and SOS mode"
C. While in turn off state: Press the switch for 3
seconds to set "Low". Press the switch for 3 seconds
again to set "Locking" - Quickly click three times the
switch to set "Unlocking".
The high brightness mode has a limit of 3 minutes.
The original state can be restored after charging.
Charging
1
1. Turn ON
2.Plug USB Cable
NOTE:
Red fast flashing - abnormal charging
(SCREW DOWN the End Body)
1
3
2
1
5
Working Voltage: 2.7-8.4V
Powered by 1* 21700 battery
2 x CR123A
(Differences in body diameter support )
CHARGE the flashlight before use.
SCREW DOWN the Body before charging / use
Blue - fully charged
Blue flashes - charge sufficient
Red - low charge
Red flashes - critical
Smart brightness adjustment
Loose the body to avoid accidental activation
Charge at least once every 6 months
Charging 2
Blue - fully charged
Red - while charging
Only low modes are available while charging.
Press the switch for 2 seconds to turn on.
18650 battery
/ 1*
/
2
4
6
Publicidad
Manuales relacionados para Soonfire E15
Resumen de contenidos para Soonfire E15
- Página 1 High performance-price ratio | Excellent customer support Working Voltage: 2.7-8.4V Email:sale@soonfire.com Powered by 1* 21700 battery 18650 battery / 1* Website:http://www.soonfire.com 2 x CR123A (Differences in body diameter support ) Activate your warranty: CHARGE the flashlight before use. http://www.soonfire.com/warranty SCREW DOWN the Body before charging / use Blue - fully charged Blue flashes - charge sufficient User Manual for the Flashlight Red - low charge Red flashes - critical A. Press the switch for 0.5 seconds to turn on - Set the switch on "low-middle-ultra-bright mode" brightness - Press the switch for 0.5 seconds to turn off and memorize last mode. B. Quickly double-click the switch to choose "ultra-bright mode" - Quickly double-click the switch again to set "Strobe and SOS mode" C. While in turn off state: Press the switch for 3 seconds to set "Low". Press the switch for 3 seconds again to set "Locking" - Quickly click three times the Smart brightness adjustment switch to set "Unlocking". Loose the body to avoid accidental activation The high brightness mode has a limit of 3 minutes. Charge at least once every 6 months The original state can be restored after charging. Charging 2 Charging 1. Turn ON...
- Página 2 ITS Smart Temperature Control System Section structure diagram Schematic circuit diagram Regularly cleaning the battery contacts (by 1.Brightness automatically decreases with time. using a cotton swab soaked in rubbing 2.High brightness mode has a limit of 3 minutes. alcohol) can improve the flashlight's 3.The usage time varies depending on the performance as dirty contacts may cause battery capacity. the flashlight to stop working. ALLUMER / ÉTEINDRE Drücken den Schalter 0.5 Sekunde, Ein- und Un clic simple sur l'interrupteur latéral 0.5s Ausschalten Drücken Sie den Seitenschalter, pour allumer ou éteindre la lampe. um das Licht ein/auszuschalten, um durch CHANGER DE MODE niedrige,mittlere und hohe zu wechseln. Pointe et clique: brillant bas-brillant- hyper Doppelklicken Sie auf Turbo, um aus jedem brilliant Modus zu wechseln. Ein weiterer Doppelklick, Faire un double clic pour mettre le mode turbo um Strobe zu erhalten. depuis n'importe quel mode. Faire un second Speicherfunktion: double clic pour le mode Stroboscope. Wenn das Licht ausgeschaltet ist, drücken und FONCTION MÉMOIRE halten Sie den Seitenschalter, um den La lampe s'allumera avec le dernier mode Feuermodus zu erhalten. utilisé hormis si celui-ci était le mode Luciole, Sperrfunktion, Des dreifachen Klickens des Turbo ou Stroboscope.