MSW -DEH3090H Manual De Instrucciones página 25

LED defrost
indicator
AUTO button
In-dry button
Digital display
3.3.2. Settings
Mode of operation
A. Operation in AUTO mode
Press the POWER button to turn on the device. Then press the AUTO button.
The unit starts dehumidifying in the AUTO mode, regardless of the humidity. In this
mode, you cannot set the humidity or the timer.
B. Normal operation
Press the POWER button to turn on the device.
Press the AUTO button to deactivate automatic mode.
The unit is in standard mode with the default humidity setting of 50%.
Press the POWER button again to switch off the dehumidifier.
The fan runs for a while and then stops
Humidity setting (setting range: 10% -95%):
The humidity setpoint can be adjusted in the standard operating mode.
Press the ADD / MINUS several times to adjust the humidity setpoint.
Set the humidity level between 40% and 60% for comfort.
The device will turn on and off to maintain this level.
It lights up when automatic defrosting is in progress.
When the dehumidification mode AUTO is turned on, you can
press the ADD button and MINUS and SET, but the humidity
data cannot be changed.
After turning off the device, press this button and the device
will dry inside.
Displays the current humidity (10-95%) and the humidity
setting (10-95%).
Displays the timer setting and temperature.