PNI CPA700 Manual De Usuario página 4

Failure to comply with these parameters can lead to the malfunction of the
compressor or even to its failure.
3. Generally, it takes about 3 minutes of operation to bring the pressure of a tire
close to the desired value, say about 30 PSI / 2.2 Atmospheres. If the value on
the manometer increases much faster and exceeds 100 PSI 7 Atmospheres,
stop and disconnect the compressor because there is a problem, a blockage.
Check the cables and hose and try again.
4. Always monitor the pressure indicated on the manometer and do not let it
inflate more than necessary.
5. To keep the compressor in good condition, it is recommended to use it for
a maximum of 10 minutes, followed by a 10-minute break, to allow it to cool
down and to avoid damage to the engine and other components.
5. Protect the compressor from water, do not hit it and do not let it out of your
hands, as malfunctions that are not covered by the warranty may result.
Technical specifications
• Power supply: 12V DC
• Voltage range: 10V-15V DC
• Airflow: 70L/min
• Current: 18A - 25A
• Maximum pressure: 150 PSI 10 Atmospheres
• Operating temperature: -26°C ~ +80°C
User manual - 4