Publicidad
Idiomas disponibles
Idiomas disponibles
7 - belt
8 - engine
9 - engine pulley
10 - bearing bar
11 - bearing
12 - bearing seat
13 - pulley
14 - feather outlet
15 - on/off switch
3.2.
Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 10 cm distance between each
side of the device and the wall or other objects. The device should always be used
when positioned on an even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental and sensory functions.
Position the device such that you always have access to the power plug. The
power cord connected to the appliance must be properly grounded and
correspond to the technical details on the product label.
The machine should be located so that the access to all sides of the machine and
its elements is not difficult. This will enable efficient servicing of the machine and
secure its cleanliness for sanitary purposes.
3.3.
Device use
PLEASE NOTE: The machine is designed to work with dead, bloodless and
previously scalded quails. It is recommended that there is only one quail in the
drum.
1. Check that the belt at the swivel plate is not too loose.
2. Connect the plug to the mains socket.
3. Turn the machine on using the switch.
4. When the plate starts to rotate, put the birds heads down into the drum.
5. Pour water into the drum - water makes plucking and removing waste easier.
6. Turn the machine off with the switch.
7. Pull out the bird.
8. Disconnect the machine from the power supply.
Publicidad
