BENIFERRO ZWMX7525-P Manual De Instrucciones página 3

Introduction
This manual contains all the necessary information for installation, debugging and
maintenance. Read the manual thoroughly before opening or using the device. The
manufacturer of this product is not liable for any injury or damage to the product resulting
from improper installation or maintenance. It is essential that you follow the instructions in
this guide. Installation by qualified personnel is required.
○ Only a qualified installer, service center or authorized dealer can repair this product.
○ Maintenance and operation should be carried out according to the recommended time
and frequency specified in the manual.
○ Use only original standard parts. If you do not do this, your warranty will lapse.
○ The measuring probes must also be always kept moist during
transport (for any maintenance or repair work at the
supplier). .
)
Properties
○ Durable: The materials used are chlorine, acid (sulfuric acid) and alkali resistant. They are
resistant to long-lasting swimming pools (even with salt for salt electrolysis). The dosing units
are not suitable for use with hydrochloric acid (HCl).
○ Easy operation: The device is very comfortable and easy to use. Turn on the device and
set the desired pH value (acid) or redox value (chlorine).
○ Low costs: The operating costs are very low, because with proper use the pool water will
never turn green.
○ The pH and ORP system should be calibrated regularly and proper
operation checked using a sonic colour measurement method (e.g.
Poollab ZWMX1060).
3