Technical Specifications - Futurelight WL-250 MK2 Manual Del Usuario

3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly.
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the lamp and the fuse. Maintenance and service
operations are only to be carried out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamps".
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Protection grade:
DMX-control-channels:
DMX-512-connection:
Dimensions (LxWxH):
Weight:
Fuse:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Accessory:
SYLVANIA BA250/2 SE D 90V/250W GY-9.5
GE CSD250/2 95V/250W GY-9.5 2000h 8500K
PHILIPS MSD250/2 90V/250W GY-9.5 2000h
OSRAM HSD250/80 90/250W GY9.5 3000h 8000K
FUTURELIGHT EX-6/32 controller
FUTURELIGHT EX-8/32 controller
FUTURELIGHT CP-240 controller
FUTURELIGHT CP-512/64 controller 16bit
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
FUTURELIGHT DES-3 DMX-terminator 3-pin
Please note: Every information is subject to change without prior notice. 21.08.2007 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
B
CAUTION!
230 V AC, 50 Hz ~
600 W
IP 33
4
3-pin XLR
225 x 360 x 595 mm
19 kg
T 3.15 A, 250 V
45° C
170° C
0.5 m
1 m
No. 89106120
No. 89106100
No. 89106115
No. 89106210
No. 51834046
No. 51834047
No. 51834265
No. 51834295
No. 51860102
No. 51860110
No. 51834001
22/43 00026452.DOC, Version 1.1