Publicidad
Idiomas disponibles
Idiomas disponibles
Charging
To charge your speaker, connect one end of the provided USB
cable to the Micro-USB port located on the back panel, then
connect the other end to a USB power source.
Note: When the battery is low, the speaker will make a tone notification from time to time, and the battery icon
red on the LCD display. The light mode may not work properly, and the volume will turn lower, indicating that it requires
charging. When the battery is depleted, the speaker will automatically power off.
Powering on / off
Powering on
To power on your speaker, slide the power switch on the back panel to the "ON" position.
Powering off
To power off your speaker, slide the power switch on the back panel to the "OFF" position.
Bluetooth Mode
Bluetooth connection with your device
When the speaker is turned on, it will automatically enter Bluetooth pairing mode. Turn on Bluetooth in your device's set-
tings and search for ''CPA909'', then tap ''CPA909'' to connect.
Enter Bluetooth pairing mode
Connected to a device
(Successfully paired with your device).
NOTE: The speaker will automatically be paired with your last successfully connected media device next time it is turned on.
LCD display first shows "Lod", then "bLUE" flashes.
ON
Power on tone notification
OFF
LCD display will be turned off.
"bLUE" flashes on the LCD display.
"bLUE" stops flashing.
Connected tone notification
EN 2
Charging
Steady red
Fully charged
Off
will flash
Publicidad
