Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
Place the product
1 Place the product upright on a stable surface and insert the power
plug into the electrical outlet .
2 Press the power/air flow strength button to turn the product on .
The product will start running at the last setting used if the power
plug has not been pulled out .
The product can also be turned on using the power button on the
remote control .
3 Select the desired air flow strength .
Pressing the power/air flow strength button lights the indicator light
and changes the air flow strength as follows .
Low → Medium → Strong → Light/Power Off
Start timer
•
Pressing timer button changes the preset time as follows:
1(h) → 2 → 4 → Timer/Power off .
•
The timer can also be changed using the timer buttons on the
remote control .
•
To turn the product off with the remote, press the button for the
selected time again .
1(h) → 2 → 4 → Timer/Power off
Oscillation
Horizontal oscillation
•
The oscillation cannot be done manually . Use the oscillation button
to change the angle of the product . Forcibly changing the angle will
damage the product .
•
Press the horizontal oscillation button to start product oscillation left
and right . Press the oscillation button again to stop product oscillation .
Left and right angles cannot be changed manually . Change angles by
→
switching [oscillation]
[stop] operation using the knob .
Vertical oscillation
•
The PCF-HE18R can be adjusted in 7 positions from -20° to 90° .
•
The PCF-HE15R can be adjusted in 6 positions from -22 .5° to 90° .
7
CLEANING AND MAINTENANCE
Always turn off the power and unplug the power plug from the electrical outlet when cleaning the
product . Use caution, the motor will be hot immediately after use . Confirm the motor has cooled
before cleaning the product .
Caution
Do not use paint thinner, alcohol, benzene, alkaline detergent, or bleach, etc . when cleaning the
product . Using such substances can cause damage, malfunctions, or changes in color, shape, and
quality .
Using the product in dusty condition can cause it to malfunction . Check and clean the product regularly .
Internal cleaning
1 Remove the front guard .
Unscrew the 3 screws from the back cover and remove the
front guard .
*Make sure that all the screws are removed .
2 Remove debris using a vacuum cleaner . Wipe off debris that
cannot be removed by vacuuming using a soft cloth .
3 Assemble the front guard .
Assemble the front guard by tightening the screws .
External cleaning
•
Wipe lightly using a soft cloth .
•
For hard to remove dirt, wipe using a cloth containing a
diluted neutral detergent .
How to store
When the product is not used for an extended period of time,
cover the unit with a plastic bag, etc ., and then store it in a dry
location away from direct sunlight .
Screws×3
Hole
Front guard
Vacuum
Screws×3
Hole
Front guard
8
Publicidad
