rock space ZC1 Manual Del Producto página 4

English
Instructions
1. Install Blade Kit
01. Loosen the blade kit clamp
counterclockwise
- +
03. Put into the groove in a
vertical position
2. Power On
Connect the power cord to the adapter and then connect the power cord to the power socket.
To ensure the normal operation of the device, please use 100-240 volts AC power; Connect the
adapter to the power interface of the device; Install the blade kit on the knife holder to ensure
it is fixed correctly. After connecting, press [Power Switch] to start the device.
3. Cut Film
When using it for the first time, you need to click [select language] to complete the language
setting, then you need to click [set WIFI] to complete WIFI connection.
1 2
02. Set to scale "1"
0 4 . T i g h t e n t h e b l a d e k i t c l a m p
clockwise to lock the knife handle
English
01. Please prepare a protective film to be cut as shown in the figure. Confirm that the protective film is flat
and complete,without bending, folding or missing layer.
02. Press down the pressing bar to lift the platen roller, and place the protective film in the dotted area as
shown.
03. Slowly lift the pressing bar so that the platen roller presses the protective film.
6 - 7