Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3
Use
The normal operating phase is remote
reading of meters through radio modules.
In AMR (fixed) mode, each radio module
transmits the reading at a programmable
frequency. In mobile mode (Walk-By/Drive-
By), the radio module emits a data frame
with the measurements. To receive the ra-
dio module signal, hold a suitable receiver
near the meter. The fixed (AMR) system
reads data automatically.
Factory
configuration
current volume, date and
Data sent
Transmission time
Transmission
frequency
Encryption
Alarms (default)
Battery Duration
Single mode
wM-Bus
Tiny frame C1 (default):
time, volume on billing
date, billing date, errors
08:00 - 18:00
16 sec
not active
backflow (100 litres), suspected leak (observation frequency 15 min / observa-
tion period 48 hours), max flow rate (disabled)
15 years
WARNING!
l
Reading of data can be per-
formed using various software.
Please consult the metering op-
erator for more information on
the specific use of reading soft-
ware.
Dual mode
wM-Bus
Tiny frame C1 (default):
current volume, date and
time, volume on billing
date, billing date, errors
08:00 - 18:00
30 secs
not active
LoRaWAN
current volume, date and
time, volume on billing
date, billing date, errors,
daily consumption up to
7 previous days, alarms
00:00 - 24:00
2 per day
native
15 years
21
Publicidad
