Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
ALWAYS unplug the Infinity Blender
26.
Customer Service* if a lot of smoke is escaping from the air
vent during operation. Note: It is normal for some smoke
to escape the Infinity Blender
for the first time. When blending for a long period of time,
steam may escape from the Plunger Cap.
ALWAYS have service provided by NuWave
27.
center authorized by manufacturer if any trouble arises during
operation.
*Customer Service Department.
1-888-502-7807 • support@nuwavenow.com
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT
SAFEGUARDS, ADDITIONAL SAFEGUARDS, OR THE
INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR BRIO
THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF
SERIOUS INJURY.
Electrical Information
A short power-supply cord (or detachable power-supply cord)
is provided to reduce the risk of becoming entangled in or
tripping over a longer cord. Longer detachable power-supply
cords or extension cords are available and may be used if care
is exercised in their use. If a longer detachable power-supply
cord or extension cord is used:
The marked electrical rating of the extension cord should be
1.
at least as great as the electrical rating of the appliance.
The longer cord should be arranged so that it will not drape
2.
over the countertop or tabletop where it could be pulled on
or tripped over.
The appliance has a polarized plug (one blade is wider
3.
than the other). To reduce the risk of electric shock, this
plug is intended to fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not
attempt to modify the plug in any way. If the appliance is of
the grounded type, the cord set or extension cord should be
a grounding-type 3-wire cord.
8
important safeguards
Pro Plus and contact
™
Pro Plus when blending
™
LLC or a service
®
PARTS & ACCESSORIES
Blender Base
Part #: MRA2
Plunger Lid
Jar with Blade
Part #: MRA3
Part #: MRA1
Plunger Lid Seal Ring
Silicone Pad
(comes assembled onto
Part #: MRA5
Part #: MRP1
Quiet Cover Silicone Lining
(comes assembled onto Quiet Cover)
To order replaceable parts, head over to the Replaceable Parts and then call
Customer Service at 888-502-7807 or visit nuwavenow.com
Door Cover
Part #: MRP2
Back Cover
Part #: MRP3
Quiet Cover
Part #: MRA7
Plunger Cap
Part #: MRA4
Plunger
Lid)
Part #: MRA6
Part #: MRP4
9
Publicidad
