Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Manual Instructions
WARNING
•
Read and understand all warnings and instructions in
manual before use.
•
Failure to comply with these warnings may result in loss
of load, serious property damage and/or personal in-
jury.
•
Do not exceed rated capacity per stand.
•
Load in center of saddle only, not ends.
•
Both stands must be set at same height with ratchet
lock cam fully engaged.
•
Use only on hand level surface capable of sustaining
loaded stand, unstable stand may result in loss of load.
•
Make sure stand placement is per specified location by
vehicle manufacture instructions.
•
Do not attempt to lift end of vehicle is stands are be-
ing used on opposite end or side, use only 2 stands per
vehicle.
•
Make sure load is stable before going under vehicle. Do
not rock or jar load.
•
Lower vehicle slowly onto stands.
•
Do not crawl under vehicle during placement of stands.
•
It is owner/operator responsibility to keep and maintain
all warning stickers, manuals and instructions for future
reference.
•
Always chock unlifted wheels from front and behind,
making sure parking brake is on.
•
Visual inspection must be made before each use chec-
king for cracked welds, bent metal, damaged, loose or
missing parts.
•
Do not use this product if any of the aforementioned are
present.
•
Immediate inspection must be done if product is be-
lieved to have been subjected to an abnormal load or
shock.
•
The manufacturer assumes no responsibility for perso-
nal or property damage resulting from any misuse of this
product.
•
Never overload this product maximum load not to ex-
ceed rated capacity per stand. Refer to the chart to de-
termine the load capacity for your model, also reference
to markings on stands.
Description:
This pair of stands are designed as a temporary load
support for vehicles.
Owner/operator responsibility:
It is the owner/operators responsibility to properly use and
maintain this product.
This manual and all warnings must be read and understood
by the owner/operator prior to use.
Assembly before use:
1. Install ratchet stem into base with teeth facing locking
cam.
2. With hammer & punch, bend tab to retain stem into
base.
3. Lubricate moving parts with light oil.
4. Raise then lower ratchet stem locking cam into each
tooth for testing. Do not use if abnormal function is
found.
WEIGHT CAPACITY PER STAND
Model no.
53779
53845
Operation:
Prior to each use inspection for damage/wear and test of
ratchet is required. If any damage or abnormal function is
found, do not use either stand.
Raise vehicle to desired height. Make sure unlifted wheels
are chocked and parking brake is on.
Place stands under vehicle support points shown by vehicle
manufacture. Do not crawl under vehicle when setting
stand.
Set stands to same height and make sure lock cam is
engaged fully into ratchet stem teeth.
Slowly lower vehicle onto the center of the stands saddles.
Make sure the vehicle is stable.
· 3 ·
Ton.
Lbs.
3
6.000
6
12.000
Kg.
3.000
6.000
Publicidad
