Qilive Q.3407 Manual De Instrucciones página 5

4.2. ASSEMBLING THE ARMRESTS
1. Place the backrest and seat together to form the chair, and then put the chair on
its side.
2. Line up the screw holes on the armrests with those on the chair.
3. Put the four armrest screws (the longer screws – M6 x 25mm) into the screw
holes. Use the Allen key to partially tighten the screws in place. Once all the
screws are in place, firmly tighten them.
4. Push the armrest screw caps over the screw hole.
5. Repeat the process to install the other armrest.
4.3. ASSEMBLING THE CASTERS AND STAR BASE
1. Attach the five casters by pushing them onto the star base until they are securely
fixed into place.
2. Insert the gas spring into the centre of the base. Remove the protective cap (if
necessary).
3. Place the gas spring cover over the gas spring. Make sure to put it in place now
because you will not be able to include it in the assembly at a later stage.
4.4. ASSEMBLING THE CHAIR ONTO THE BASE
1. Insert the gas spring into the central hole of the seat plate installed under the seat.
2. Sit on the seat to firmly secure the gas spring cover to the chair. The assembly of
your gaming chair is complete.
5
EN