Kobalt 0019006 Manual De Instrucciones página 6

ASSEMBLY INSTRUCTIONS
1. Ensure all cabinet drawers are securely
locked into place using the lock (DD)
and key (EE) on the base cabinet (A).
Lay the base cabinet (A) on its back
using the cardboard package materials
to protect the finish. Mount the two fixed
casters (B) to the base cabinet (A)
using M8 x 25 mm bolts (AA), M8 mm
spring washers (BB) and M8 mm flat
washers (CC). Repeat this process for
the swivel casters with brake (C) on the
opposite side of the base cabinet (A).
Return the base cabinet (A) to its
upright position.
Note: Be sure to keep the base cabinet (A) on
a soft surface, such as carpeting or a piece of
cardboard, to protect them from scratches.
The swivel casters with brake (C) must be
installed in the front of the base cabinet (A).
Do not over tighten the screws.
Hardware Used
AA
M8 x 25 mm Bolt
M8 mm Spring washer
BB
CC
M8 mm Flat washer
1
x 16
x 16
x 16
6
C
A
CC
BB
B
AA