Wilfa GLACIER Manual De Instrucciones página 9

BEFORE USING THE APPLIANCE FOR THE FIRST TIME
• Before using the Ice maker for the first time, please wait 2 hours after
positioning it, and keep the lid open for at least 2 hours before turning it on.
• During transportation, do not tilt the machine more than 45 degrees, do
not reverse the machine. This may damage the compressor and the sealing
system.
• Remove all packing materials, check the machine carefully and make sure that
the machine, power cord and plug are normal.
• The machine should be on a level surface. To ensure sufficient ventilation, the
distance of the back of ice maker to the wall should be at least 15cm, it should
be away from the oven, radiator or other heat source. Keep the appliance 8cm
from other objects on the sides to ensure good heat releasing.
• Make sure that the home voltage is consistent with the voltage indicated by
the machine.
• When the ambient temperature is lower than 15 degrees, please choose
small ice. When the ambient temperature is higher than 30 degrees, it is
recommended to choose large ice.
• Do not use chemicals, acidic or alkaline liquids to make ice.
• Pure water is not allowed to be used on this unit, spring water is
recommended.
• It is normal for the compressor and condenser surface to reach temperatures
between 70°C and 90°C during operation and surrounding areas may be very
hot.
• Due to fast freezing, ice cubes may opaque. This is air trapped in the water
and will not affect quality or taste of ice.
• Do not immerse in water.
• Do not switch on the power button frequently (ensure 5min. interval at least)
to avoid the damage of compressor.
ICM1-600 · GLACIER
7
EN