JOCCA 2073 Manual De Instrucciones página 6

EN English
-There will be the cover of the bag that gives access to the charging terminal, and
insert the charger connector, make sure that you have inserted the entire connector,
as shown in figure 3. This step is very simple since the charger has of a mobile post.
-Once all the connections are made, you can connect the plug to the mains and
the "charging light indicator" will turn on. When the bag has reached its maximum
temperature, the charging indicator light will turn off automatically.
-The bag will be warm between 2 – 4 hours, depending on body temperature and
ambient temperature.
-Disconnect the plug from the outlet, and proceed to disconnect the water bag from
the charger, hold the water bag in the area of the cap and remove the connector,
as seen in drawing 6.
-Close the loading lid and you can now use the water bag.
CLEANING AND STORAGE
-Make sure that the appliance is disconnected from the power supply before cleaning.
- Do not use abrasive detergents or products that could damage the appliance.
- Allow the appliance to cool down before proceeding to clean it.
-If you do not use the device, store it in a dry place, avoiding placing heavy objects on it.
- Once you have finished using it, store it in a dry and safe place.
- Avoid creases and periodically check if the cable or mains plug have any damage, if
so, do not use the device, do not try to replace the cable, take it directly to the JOCCA
technical service.
-Clean the appliance first using a slightly damp cloth and then a dry cloth.
TECHNICAL DATA
220-240V ~ 50Hz 400W
This product complies with directives 2014/35/EU EMC, 2014/30/EU LVD,
2011/65/EU & 2015/863/EU ROHS.
PRODUCT RECYCLING – ENVIROMENT
Do not throw this product in the trash at the end of its useful life. Take it to a
waste collection point, designated for this purpose (subject to the 2012/19 /
EU DEEE directive).
6