Descargar Imprimir esta página

Worx WX045L Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

SUGGESTED BATTERIES AND CHARGERS
Category
20V Battery
20V Charger
We recommend that you purchase your accessories from the same store that
sold you the tool. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.
4. OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
INTENDED USE
The tool can be used for bonding wood, leather, plastics ,papers and other
materials.
OPERATION
EN
10
Inserting or removing the battery pack
Charging the battery pack
Insert the glue stick into the glue stick hole
Press the ON/OFF switch for 3 seconds.
The heat indicator light will be red as it heats and will turn green
when it is ready to use.
Press the switch trigger for gluing
NOTE: It is recommended to apply the glue on large surfaces
or long work pieces in the form of points. On flexible materials,
apply in lines.
WARNING: Do not allow the hot glue or the nozzle tip
to come into contact with persons or animals.If hot
glue contacts with the skin, do not try to remove the glue
from the skin,but put the affected area immediately under a
stream of cold water for several minutes.
Model
WA3669
WA3742
ACTION
Capacity
2.0 Ah
0.4 A
FIGURE
See Fig. A
See Fig. B
See Fig. C
See Fig. D
See Fig. E

Publicidad

loading

Este manual también es adecuado para:

Wx045l.x