Publicidad
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furniture tip over.
To prevent tip over:
* Install tip over restraint provided
*place heaviest Items in the lowest
drawers
* Unless specifically designedto
accommodate, do not set T V sor
other heavy objects on the top of
this product
* Never allow children to climb or
hang on drawers, door, or shelves
*Never open more than one drawer
at a time
Use of tip over restraint may only
reduce, but not eliminate the risk
of tip over
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracke
aligned in this location.
T o mak e driving the screw easier , you can drill a 1/8" diameter pilot hole (3mm) through the safety
bracket into thestud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that w as not fully
Tighten in step 5.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then
move your unit aside.
Drill a 3/16" diameter hole (5mm) into the wallboard. T ap the wall anchor into the hole un
Move your unit into location and fasten the wall bracket to the wall anchor with the screw .
Tighten the screw that w as not fully tightened in step 5
ameriwoodhome.com
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
attach the safetybracket.
39
hole
stud
w allboard
Publicidad
