CG 4032
• Never use your coffee maker without water in it.
• Stand the appliance on a table or flat surface.
• This appliance is intended to be used in household
applications such as:
o Reserved kitchen areas for staff in shops,
offices and other working environments.
o Farms.
o By clients in hotels, motels and other
residential environments.
o In environments such hotel room
CAUTION: The surface can remain hot during or
after use.
BEFORE FIRST USE
Check that all accessories are complete and the unit is not damaged. Add water into water tank to
the MAX level and brew water for several times without coffee powder, then discard the water. Clean
all detachable parts thoroughly with warm water.
USING YOUR COFFEE MAKER
1. Open the tank cover and fill fresh water. The water level should not exceed the max level as
indicated on the water tank. Replace the tank cover.
2. Swing the funnel support out and place the filter in the funnel, and make sure it is assembled
correctly.
3. Add coffee into filter. Usually a cup of coffee needs a level spoon of coffee, but you may adjust it
according to personal taste.
4. Turn the water dispenser and place it on the coffee filter.
5. Insert the jug on the keeping warm plate horizontally.
6. Plug the power cord into the outlet.
7. Pulse the switch, the indicator will be illuminated. The appliance will begin working. The brewing
process can be interrupted pressing the switch at any time. The appliance will continue brewing
once the switch is turned on again.
10