Dockin D PURE NC Manual Del Usuario página 14

PAIR YOUR HEADPHONE
• The headphone must be switched off. Press the multifunction
button longer (approx. 5 sec.) and the headphones switch to
2
pairing mode.
• A signal tone is now heard and the status LED
nately red and blue!
• Turn on your mobile device and enable Bluetooth to connect it
to your new headphone.
STANDBY MODE:
Your headphone will switch automatically into the standby mode
once the sound has muted
UNPAIR YOUR HEADPHONE:
You can unpair your headphones via the settings of your mobile
phone or any other source device.
POWER ON/OFF
• Press the multifunction button
to turn on your headphones. Then the status LED
up blue for a second.
• Press the multifunction button
to turn off your headphones. Then the status LED
up red for a second and then turns off.
14
5
a little longer (approx. 2 sec.)
2
a little longer (approx. 3 sec.)
2
flashes alter-
will light
5
will light
5