Publicidad
Idiomas disponibles
Idiomas disponibles
SELECT A FLAT CLEAN LOCATION TO ASSEMBLE YOUR PRODUCT.
Deluxe Fire Pit Cover Assembly
STEP 1
Open up the fabric cover so the Blue Sky Logo is face down. You will need access to
the center of the cover for support assembly.
Place one end of a rod (C) inside the center hub (B) - the end of the rod with the
protective plastic cap would be sticking out of the hub.
STEP 2
Insert the capped end of the rod into the pockets that have been sewn into each of
the corners of the inside top of the cover. (Make sure the flat side of the hub is laying
directly on the cover fabric. The X should be facing you during installation.)
Repeat steps 1 and 2 until all four rods have been inserted in the center hub and
secured in each corner. (You may need to pull the last corner a little to get the rod to
slip into place.
STEP 3
Turn the cover over so that Blue Sky logo is showing and
place the assembled cover over your Blue Sky square fire
pit. (FIRE PIT SHOULD BE COMPLETELY COOL)
5 | www.bluesk youtdoorliving.com
C
B
C
B
A
A
Publicidad
