Sauder Beginnings Serie Instrucciones De Montaje página 6

Step 2
NOTE: Before beginning this step, separate the SLIDES from the SLIDE SETS (16B) and the DRAWER PINS at the end of
å
the SLIDES using a SCISSORS. Save the DRAWER PINS. You will use them in Step 10.
Fasten the SLIDES (16B) to the ENDS (FF and GG). Use four SILVER 3/4" PAN HEAD SCREWS (52S) through the fi rst and
å
last holes in the SLIDES.
NOTE: The SLIDES are marked "RIGHT" and "LEFT" for easy identifi cation. The SLIDE marked "RIGHT" will fasten to the
å
RIGHT END (FF) and the SLIDE marked "LEFT" will fasten to the LEFT END (GG). There are also arrows on the SLIDES for
correct positioning on the ENDS.
Notch
Straight edge
Finished edge
Page 6
DRAWER PIN
(Save for Step 10)
Angled edge
LEFT SLIDE
16B
GG
Using your Scissors, separate the
SLIDES and the DRAWER PINS
16B
415544
16B
RIGHT SLIDE
Finished edge
FF
52S
SILVER 3/4" PAN HEAD SCREW
(4 used in this step)
www.sauder.com/services