Descargar Imprimir esta página

GreenWorks Pro CRZ426 Guía De Montaje página 10

Cortacésped de giro cero
Ocultar thumbs Ver también para CRZ426:

Publicidad

Idiomas disponibles

Idiomas disponibles

CHECK TIRE PRESSURE
Check the air pressure in all tires before use.
Improper air pressure will affect handling,
steering response, traction, tire life, level cutting,
and operator comfort. Be sure tires are inflated
to the pressure shown below.
Tire pressure should only be measured or
adjusted when tires are cold.
Front caster wheels
Drive wheels
WARNING
Check the tire pressure carefully while inflating.
Too much air in the tire could cause the tire to
burst, causing serious personal injury.
CHECK THE BATTERY CAPACITY
To verify mower batteries are fully charged,
check the battery level indicator. See battery
manuals for details.
WARNING
To avoid accidental starting or movement of
the mower that could result in serious personal
injury, always remove the start key and set
the parking brake when leaving the mower
unattended.
Always charge batteries after each use.
FINAL PREPARATION
NOTE
37 psi
8 psi
NOTE
TEST THE SAFETY INTERLOCK SYSTEM
This mower features a Safety Interlock System
to protect the operator by shutting off the blades
if the operator leaves the seat with the blades
running. Test the system to be sure it is working
correctly.
TO TEST:
Make sure direction control switch is in
PARK position and PTO switch is down.
Make sure the operator is on the seat.
Install start key and turn to ON (
Raise the PTO switch to activate blades.
Briefly lift off the seat, but do not get off the
mower.
The blades should shut off within 5 seconds. If
they don't, verify you connected the seat plug
to the machine. If the plug is connected but the
system still doesn't function, contact customer
service. Do not operate the mower until the
safety interlock system has been repaired.
10
) position.

Publicidad

loading

Este manual también es adecuado para:

Crz428