PRODUCT USAGE
OPERATING THE SPEED CONTROL
This KitchenAid Hand Mixer will beat faster and more thoroughly than most other electric hand
mixers. Therefore, the beating time in most recipes must be adjusted to avoid over beating.
Beating time is faster due to larger beater sizes.
To help determine the ideal beating time, observe the batter or dough and beat only until it has
the desired appearance described in your recipe, such as "smooth and creamy". To select the
best beating speeds, use the "Speed Control Guide" section.
1.
Make sure the Speed Control is in the "OFF/0" position by sliding it backward as far as
possible. "OFF/0" will be visible on the Speed Control pad. Then plug the Hand Mixer into
an electrical outlet.
2.
Start mixing at the lowest speed by sliding the Speed Control forward to the first position
mark, which is Speed 1.
3.
To increase the Hand Mixer speed, slide the Speed Control forward. To decrease the Hand
Mixer speed, slide the Speed Control backward. See "Speed Control Guide" section.
4.
When finished, slide Speed Control to "OFF/0". Unplug the Hand Mixer before removing
the accessories.
PRODUCT DISASSEMBLY
REMOVING THE ACCESSORIES
1.
If the Hand Mixer is running, stop the Hand Mixer by sliding the Power switch to "OFF/0".
Then unplug from the electrical outlet.
2.
Press the Ejector Button to release the accessories from the Hand Mixer, then remove
them.
6
WARNING
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in broken
bones, cuts, or bruises.