Publicidad
Idiomas disponibles
Idiomas disponibles
A
Product overview
Thread take-up lever - Controls the amount of upper thread supplied. The self-
threading slot makes it easier to thread the take-up lever.
Thread guide - Guides the thread from the spool pin to the tension discs or
bobbin winder.
Carry handle - It is built in to make the machine easy to transport.
Bobbin winder - Winds the thread onto the bobbin for use as the lower thread.
Bobbin winder stopper - This is used during the bobbin-winding process.
Needle clamp screw - Secures the needle in the sewing machine for sewing
purposes.
Needle - It is inserted into the needle bar. It contains the sewing thread.
Presser foot holder - This is attached to the presser foot bar. It keeps the
presser foot in place for sewing.
Throat plate - This is located under the presser foot area, around the feed
dogs. It provides a flat sewing surface for the fabric.
Bobbin cover release button - This is located to the right of the bobbin cover.
Push the button to the right to remove the bobbin cover when replacing the
bobbin.
Bobbin cover (and bobbin case inside) - It protects both the bobbin and bobbin
case. It is transparent, which makes it easy to check the bobbin's (lower) thread
feed.
Bobbin case - Securely holds the bobbin and keeps the bobbin thread taut
whilst sewing.
Feed dogs - Move the fabric under the presser foot.
Presser foot - Keeps the fabric flat against the feed dogs. Use the presser foot
lifter to lower the presser foot (for sewing) or raise it (to remove the fabric).
Presser foot holder screw - This is located to the left of the presser foot
holder. It secures the presser foot holder in place on the presser foot bar.
Presser foot release lever - This is located at the rear of the presser foot
holder. Use this lever to remove the presser foot from the presser foot holder.
37
EN
Publicidad
