Table Assembly
1
Connecting the Table Top and Legs
□ Turn the Tabletop (D) upside down. Insert six Short Bolts (BB) into
the threaded receptacles, and tighten with a screwdriver.
□ Attach the Table Legs (E) loosely using M6 Washers (CC) and M6
Nuts (DD). Tighten with an adjustable wrench. (Make sure the
Center Leg Brace (F) support bracket on each Leg faces inward).
2
Connecting the Leg Brace and Legs
□ With the table upside down, insert six Short Bolts (BB) into
the threaded receptacles on each leg. Loosely tighten with a
screwdriver.
□ Turn the Center Leg Brace (F) upside down and position it inside
the legs.
□ Attach the Center Leg Brace (F) loosely onto the Table Legs
(E) using M6 Washers (CC) and M6 Nuts (DD). Tighten with an
adjustable wrench.
Tightening The Bolts
□ Make sure the chair and table stands straight and level with the
ground.
□ Tighten all Bolts.
6
Please contact 1-855-HD-HAMPTON for further assistance.
DD
CC
F
BB
HAMPTONBAY.COM
E
DD
CC
BB
D
E