Metra 99-8264HG Instrucciones De Instalación página 3

1. Attach the radio brackets to the radio
trim panel using the (4) #8 x 3/8" screws
supplied. (Figure A)
2. Mount the pocket to the radio brackets
with the (4) #8 x 3/8" Phillips screws
supplied. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the assembly and
secure with the screws supplied with
the radio. (Figure C)
KIT ASSEMBLY
(Figure A)
(Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra.
Test the radio for proper operation.
6. Secure the radio/bracket assembly to
the vehicle using the factory hardware,
and then reassemble the dash in reverse
order of disassembly.
(Figure C)
REV. 5/15/2018 INST99-8264HG
3