Husqvarna 596542901 Manual Del Usuario página 10

STEP 4
ATTACH THE CANOPY SKIN (FIG. 1-4)
PARTS NEEDED
Canopy Skin with Canopy Frame.
1
Place the Canopy Skin, attached to the Canopy Frame, over the
Roll Over Protection Bar.
4
Secure the Canopy Skin to the
Roll Over Protection Bar with the
built in Rip and Grip straps.
J
+
L
2
canopy skin removed
for illustration
Align the holes on the Canopy Frame
side bars with the curved slots on the
Sloted Plate. Slide a Carriage Bolt (K)
through the curved slot, then insert a
Lock Washer (L). Slide the Carriage Bolt
through the holes of the Canopy Frame.
10
TOOLS NEEDED
K
3
K
L
Hand tighten the 5 Arm Knob (J) onto
the Carriage Bolt. Repeat for the
second 5 Arm Knob. Repeat process to
install the canopy on the other side of
the Roll Over Protection Bar.
NONE
J