Descargar Imprimir esta página

Datamars Patriot PMX1500 Guia Del Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

equipment at the time of disposal will
help conserve natural resources and
ensure that it is recycled in a manner
that protects human health and the
environment. For more information
about where you can drop off your
waste equipment for recycling, please
contact your local city recycling office
or the dealer from whom you
purchased the product.
Installation
1
Connect the Fence ground terminal to a
separate ground system that is at least 33'
(10 m) away from other ground systems.
2
Connect the Fence output terminal to the
fence.
Indoors/Dry locations with mains/line
connector
Operation
1
Plug the unit into the mains/line power
supply.
2
Turn on the mains/line power supply
switch.
The pulse indicator light flashes each time
the unit pulses.
Building an electric fence
Note:
This product has been designed for use
with electric animal fences.
For information about building an electric fence,
refer to the Patriot website patriotglobal.com
Installing and testing a
ground system
Select a suitable site for the ground system.
Sites need to be at least 33' (10 m) from other
ground systems (e.g. telephone, mains/line
power or the ground system of another unit).
Drive six 6' (2 m) ground rods into the ground.
Use high-voltage, insulated cable and earth
clamps to continuously connect the earth rods
and the energizer's Fence ground terminal.
Make sure the insulation is stripped back to
ensure good contact between the wire and the
ground rod.
Safety considerations
Warning!
- USA and Canada - To reduce the risk of
electric shock, the unit's power adaptor
may have a polarized plug (one blade is
wider than the other). This plug will fit in
a polarized outlet one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any
way.
- Switch the unit off before installation or
performing any work on the fence.
- Read all the safety considerations
carefully.
- Check your installation to ensure that it
complies with all local safety regulations.
3

Publicidad

loading