Publicidad
Idiomas disponibles
Idiomas disponibles
OVERHEAT PROTECTION
When the tool/battery is overheated, the tool stops automatically. In this
situation, let the power tool/battery cool before turning the tool on again.
OVERDISCHARGE PROTECTION
When the battery capacity is not enough, the tool stops automatically. In
this case, remove the battery from the tool and charge the battery.
MAINTENANCE
BATTERIES
These batteries have been designed to provide maximum troublefree
life. However, like all batteries, they will eventually wear out. Do not
disassemble battery pack and attempt to replace the batteries. Handling
of these batteries, especially when wearing rings and jewelry, could result
in a serious burn.
To obtain the longest possible battery life, we suggest the following:
Remove the battery pack from the charger once it is fully charged and
ready for use.
CLEANING
Unplug before any cleaning work. Keep this battery pack free of debris
and dirt. Wipe down the equipment with a cloth and/or compressed air. It is
highly suggested that you clean the device after every use.
TRANSPORTATION
Take the battery pack from the tool, and place it into a box avoid being
exposed to sunlight during the transportation.
Not forget the charger when the battery is transported.
Allowed temperature range is between 32°F(0°C) and 122°F(50°C) during
the transportation.
Protect the battery pack from any heavy impact or strong vibrations which
may occur during the transportation in vehicles.
Do not take or send the battery pack by airplane.
STORAGE
After charging, the battery pack may be stored in the charger, as long as
the charger is not plugged in.
EN - 18
WWW.SENIXTOOLS.COM
Publicidad
