Descargar Imprimir esta página

Comelec BL 7157 Manual De Instrucciones página 8

Publicidad

USE OF THE APPLIANCE
1.Rotate the glass jar on its base follo
wing the address indicated in the dra
wing,until is fixed in the safety mecha
nism.NOTE:If you do not place the jug
correctly It may cause engine damage.
 
3. Fit the lid correctly.NOTE: Be sure
to place the jar correctly.
 
5. Screw the top cover onto your
cover housing.NOTE:Place it carefully
not spill liquid.
 
7. Place the coffee in the grinder with
Be careful not to exceed 80 g.Then
place the grinder in its base and turn it
to its locked position.Note: If you notice that the
blades do not touch coffee, don't touch them, first stop the appliance and then unplug it before of ma
nipulating it. 8. Place the chopper in its housing on the base of the blender. To chop hard food, select
2 or P. To chop soft food select speed 1.NOTE: This device has a safety system incorporated, press
the grinder with one hand, do not hold the device running more than 2 minutes when grinding coffee
or spices, etc.SMOOTHIE INSTRUCTIONS:1.Put the fruits or vegetables in the jar.2.Place the lid on
the jar.Put on the top cover and close it.3.Do not exceed 3 minutes of continuous operation.Speed 1
Beat liquids Speed 2 Beat liquids or solids,P. Whisk solids or liquids or clean the blender
NOTE: P It is advisable to chop ice and break hard food. Do not use it for a long time, or repeatedly.
TIPS:1. To get a better shake, do not put a lot of amount each time, cut the food into 2-3 centimeter
2. When you beat liquids and solids, first put some liquid, then put solid food and then add the rest
of the liquid, through the hole in the lid.3. Place and block the blender / choppers before starting it.
4.Be careful when you beat hot liquids.5.It is better to use the ice pick button to whisk or chop solids,
to prevent blade wear.6.Prepare fruits and vegetables by dicing, remove seeds, and large pieces.
7. Add liquid into the jar, then put ice cubes, close the lid and place it in its housing.
CLEANING AND CONSERVATION:1. Clean and dry all parts well after use. NOTE: MAKE SURE
THE DEVICE IS UNPLUGGED BEFORE CLEANING:2.Turn the switch to the off position and unplug
the appliance from the mains.Unscrew the glass jug from its base housing,turning counterclockwise,
Then remove the blades from their housing.3.Wash the jug,lid,top lid and blades in warm soapy water.
You can also wash them in the dishwasher, not exceeding 50 ° C.Then dry all parts and reassemble
them in place.4.First place the blades in their base,then put the sealing ring on the steel blades,rotate
the jar in the direction clockwise,then place the jar in its housing on the base.5.It is advisable to per
form a thorough cleaning of all parts once a month,as well as pour some oil occasionally lubricant on
the shaft.6.Never put the engine or its body in water, do not wash it, just label it with a damp cloth.
7. It is convenient to store the device in a well ventilated and not very humid place so that the humi
dity does not affect the motor. HANDLING:1.Hold the handle with one hand, turn the blades counter
clockwise. clockwise with the other hand
the blades are sharp.2.Assemble the blade according to the instructions.3.The sealing
ring,can be removed using some pointed object, then clean it and return to mount it.
2.Place the ingredients to beat in the jar.
Note: Prepare any type of fruit or vege
table cutters dices.Remove the very lar
ge seeds and pieces,remove the skin.
4. Add water or milk if desired through
of the lid hole.NOTE: The maximum
capacity that can be added It is 1000ml
the minimum of 250ml.The maximum
temperature of the ingredients it is 60ºC
6.Place the jar in its housing in the blender
base. Select the desired speed, "1" "2"
It works continuously. P is the vibration
button.Note: If you don't need to chop
much, Choose the red button.
remove the jug for cleaning.NOTA: Be careful,
,
8
ELECTRIC DIAGRAM - ROTATION SPEED: 16000-20000 / min
This appliance complied with the requirements of the EMC Electromagnetic Compatibility
Directive (2014/30/EU) and the LVD Low Voltage Directive (2014/35/EU), therefore it was
marked with the CE label and provided with a declaration of conformity with European
standards.
9

Publicidad

loading