Rear Panel - Mark MBS A USB SERIE Manual De Uso

REAR PANEL

MBS 15A USB
Self-powered ABS plastic molded speaker cabinet
-USB/SD/MP3 interface with navigation encoder &
LCD display
-System type: Bi-amplifed 2 ways ( 15" woofer
+ 1" titanium
diaphragm compression driver)
-Frequency Response: 50 - 20000 Hz
-Power Output: 220 W RMS ( 440 W max.)
-Input sensitivity: Line: - 20 dB, MIC: -50 dB
-Input connectors: MIC: XLR3, LINE: XLR3
+ 2x RCA+ Jack 1/4"
-Output connector: XLR3
-Indicators: Signal LED and Power LED
-Voltage: 115-230 V AC
-Dimensions: 675 x 460 x 400 mm (HxWxD)
-Weight: 21 Kg
1.GAIN: It controls the input signal level before amplification. Take it in account that a high level of gain, could
cause distortion in the output.
2.BASS & TREBLE: These knobs setup the tone level for low and high frequencies. The range is selectable
between -15 db to + 15 dB.
3.VOLUME: It controls the final volume level that is applied from the amplifier output. Take it in account that
a high level of volume, could cause distortion.
4.SIGNAL/POWER LEDs: These LEDs light when the amplifier detect input signal (SIGNAL) or when the
amplifier is powered (POWER).
5.VOLTAGE SELECTOR: Switchable between AC 115/230 V. Please check the local main supply before
conneting the device.
6. MAIN SUPPLY INLET: Connect here an IEC main power cable in order to supply the device.
Pag. 3
1
2
3
4
5
6
MBS A USB series
MBS 15A USB
User Manual/Manual de Uso
EN
7
8
9
10
11
13
12