Emerio FN-108774 Manual De Instrucciones página 5

FN-108774
PARTS DESCRIPTION
1. Front guard
2. Blade
3. Blade fastening screw
4. Fixation screws for rear guard
5. Rear guard
6. Handle
7. Motor shaft
8. Speed control switch
9. Oscillation knob
10. Motor unit
11. Power cord
12. Connecting screw and nut
13. Height adjustment pipe
14. Height adjustment knob
15. Standing shaft
16. Standing base
17. Weight support
18. Fastener
19. Base locking screw
20. Grill locking screw and nut
ASSEMBLY INSTRUCTIONS
** Please assemble correctly by the following order when using.
1. The stand assembly
Take off the fastener (18) and base locking screw (19) from the standing shaft (15).
⚫
Put the standing shaft into the center of standing base (16).
⚫
Place the weight support (17) to the bottom of the base. Tighten the weight support to the base with
⚫
fastener and base locking screw.
2. Fan head assembly
Pull the height adjustment pipe (13) out to your desired height and tighten the
⚫
height adjustment knob (14).
Place the Motor unit (10) on the top of height adjustment pipe. Use the connecting
⚫
screw and nut (12) to tighten the connection, fixing the fan head onto the pipe.
3. Rear guard assembly
Fit the rear guard (5) onto motor with the handle on the top. Tighten the rear guard with 4 fixation
⚫
screws (4).
4. Fan blade assembly
Install fan blade (2) onto motor shaft (7) and use the blade fastening screw (3) to fix the blade.
⚫
- 4 -
EN