Installing the Range Hood
FULL_NK30CB700W33AA_DG68-01416B.indb 13
FULL_NK30CB700W33AA_DG68-01416B.indb 13
10. Fix the hood to the hood mounting
bracket installed on the wall.
11. Fix the duct auxiliary bracket using
two 30 mm screw anchors in the top
left of the duct.
6" (15.2 cm)
CAUTION
• Ensure the exhaust outlet diameter and duct diameter match, and then connect
the duct to the wall outlet.
• If the duct and the wall outlet have different diameters, the suction performance
will decrease while significantly increasing noise.
The manufacturer is not responsible for any problems caused by this.
• Use the minimum possible length for the duct, and do not significantly alter the
cross-section.
• Minimize bending when connecting the duct (max bending angle: 90 degrees).
12. Fix the duct (6" (15.2 cm)) to the
hood outlet and the vent on the wall,
respectively, with tape.
English 13
English 13
2023-03-30 오전 11:17:31
2023-03-30 오전 11:17:31