Fein JME SHORTSLUGGER II Instrucciones De Uso página 14

en
14
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the spoke handle
(figure 2).
Screw the spoke handles into the intended
threads on the connection piece.
The hub assembly can be mounted on either side. (figure 3)
Loosen the screw.
Remove the spoke handle.
Mount the spoke handle on the other side and tighten the screw.
Fig. 3
2.
1.
Screw
Fig. 2
Spoke handle
3.
4.
Connection piece