Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Wait for the blinking indicator LED to change from green to amber.
4.
Use an Ethernet cable to connect the ran
5.
Connect to the Linksys Extender Setup network.
On a computer, phone, or tablet, connect to the Wi
XXX, where XXX are the last 3 digits of your range extender's MAC address.
6.
Launch setup.
Enter
http://extender.linksys.com
setup. Be sure to choose "As a wired range extender (access point)" when as
want to use your range extender. Follow the on
name and password for your access point.
7.
Connect your Wi
Select the extended network on your device's W
identi ed by "_Ext" added to the end of your main network name(s).
Note —If you r router's MAC ltering
extender into the list of the router's allowed addresses. That
devices connected to extended networks, to connect to the main network.
The MAC addresses of the extender's 2.4GHz and 5GHz radios are identi ed as Seen By
Upstream AP in the Status > WLAN Statistics screen. The MAC address of
Ethernet port is identi ed as Extender Mac Address on the Status > Device Info screen.
Once the extender can access the router, all devices connected to the extender have
access as well.
(or try
-Fi devices to the extended network you just created.
feature is on you must enter the MAC address of the
ge extender to the LAN port of your router.
-Fi network Linksys Extender Setup
http://192.168.1.1)
-screen instructions to create a network
i-Fi manager. Extended networks are
will allow the extender, and
in a browser to complete
ked how you
the extender's
–
15
Publicidad
