Publicidad
Idiomas disponibles
Idiomas disponibles
5.1 Installation on the wall
1. Take the multi directional base and hold it to the position on the wall (the bracket is flexible
and can be bent according to your needs)
2. Mark the 4 holes with a pencil
3. Drill 4 holes with 5.8 mm diameter (make sure you are in a secured position and wear
sufficient protective clothing while drilling)
4. Insert the 4 plastic plugs into the drilled holes
5. Hold the multi directional base on its position
6. Use the 4 screws to fix the plastic mount on the wall
5.2 Installation on a metal pole, or on the balcony
1. Take a metallic pole and make sure it is properly fixed and stable enough to carry the
antenna
2. Take the pole mounting kit
3. Hook the 2 U bolts on the pole (or on the metal parts of the balcony)
4. Take the multi-directional base and place it over the bolts (the bracket is flexible and can be
bent according to your needs)
5. Use the 4 wing nuts to fix them
6
PART 2
Fig. 6
Fig. 7
Publicidad
