Work Pro W ROADER 408 Instrucciones De Usuario página 2

EN
GRAPHICAL SYMBOLS EXPLANATION
This symbol, wherever used,alerts you to
the presence of un-isulated and dangerous
voltages within the product enclosure.
These are voltages that may be sufficient to
constitute the risk of electric shock.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
TO RAIN OR HUMIDITY. DO NOT REMOVE COVER. THIS PRODUCT IS
NOT INTENDED FOR USE OTHER THAN STATED.
1. Read instructions - All the safety and operating instructions
should be read before the unit is operated.
2. Retain instructions - The safety and operating instructions
should be retained for future reference.
3. Heed warnings - all warnings on the unit and in the
operating instructions should be adhered to.
4. Follow instructions - All operations and other instructions
should be followed.
5. Water & Moisture - The unit should not be used near
water, for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6. Carts & Stands - The unit should be used only with a cart
or stand that is recommended by the manufacturer.
A unit and cart combination should be moved
with care.
Quick stops, excessive force, and uneven
surfaces may cause the unit and cart combination
to overturn.
7. Grounding or Polarization - Precautions should be taken
so that the grounding or polarization is not defeated.
8. Ventilation - The unit should not be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow
of air through the ventilation openings.
9. Heat - The unit should be situated away from heat sources
such as radiators, stoves, or other appliances that produces
heat.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK) NO USER SEVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol, wherever used, alerts you to
important operating and maintenance
instructions. Please read.
10. Power Sourcers - The unit should be connected to a
power supply only of the type described in the operating
instructions or as marked on the unit.
11. Power Cord Protection - Power supply cord should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit the unit.
12. Cleaning - The unit should be cleaned only as
recommended by the manufacturer.
13. Nonuse Periods - The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14. Object and Liquid entry - Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15. Damage Requiring Service - The unit should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance.
E. The unit has been dropped, or the cabinet damaged.
16. Servicing - The user should not attempt to service the
unit beyond those means described in the operating
instructiuons. All other servicing should be referred to
qualified personnel.
PAG. 1 User Manual/Manual de Instrucciones ROADER 408